How to Use a Plumbing Snake Effectively
A plumbing snake is a flexible auger used to dislodge clogs in pipes. It is usually reserved for clogs that are particularly stubborn and difficult to remove. Some people refer to a plumbing snake as a toilet jack. Regardless of your reasons, a plumbing snake can be a handy tool to have in your arsenal. Read on to find out how to use one effectively. Once you’ve figured out how to use one, it is time to hire a plumber to clear your pipes.
A home plumbing snake works by hand, and it uncoils by rotating the handle. It is essential to move the snake in an even, steady motion as pushing or pulling it too hard can damage the pipe or drain entrance. While feeding the snake down the pipe, feel for pressure to identify an obstruction and proceed to the next step. If you feel pressure in the pipe, you’ve encountered an obstruction, and the snake can’t uncoil its own.
There are many different types of plumbing snakes, and choosing the wrong one could result in more problems than you bargained for. There are top snakes, medium drain machines, and sewer augers. The latter two are designed to reach clogs in the drain as deep as 25 feet. Choosing the wrong snake can waste your time and money. A plumbing snake with a long handle can reach the clog without causing damage.
Before attempting to use a plumbing snake, make sure that you have a bucket of hot water nearby. A bucket of hot water will help break up any debris that has lodged in your drain. A drain cleaner can also break up debris that is lodged in PVC pipes, so be careful of chemicals. Make sure to rinse the snake thoroughly. If the snake’s coil becomes clogged, it will not work effectively in the future.
If you are working with a corner, you can always turn the plumbing snake in reverse. The head will bobble back and forth until you find a good angle. This will keep the snake in one place while building tension in the cable. If you can’t turn the snake in reverse, aim for the outside bend of the turn. Eventually, you’ll be able to reach the corner and clear it. You’ll need to replace the plumbing snake once you’re finished snake-snapping your pipes.
A plumbing snake is a handy tool for clearing clogged drains. A plumbing snake is a flexible metal cable that has a small uncoiling spring on one end. This allows you to easily insert it into your drainage system. The snake will then grab the obstruction and pull it out. Then it will work its magic! Once you’ve mastered how to use a plumbing snake, it will make your life so much easier.
Once you’ve inserted the snake into the drain, turn the handle clockwise to grind the clog and remove it from the drain. The snake will wrap around the trap underneath the sink. Rotate the snake in a clockwise motion until the cable reaches the clog and becomes free. The snake’s tip will intertwine with the clog material. Continue to rotate the snake until you no longer feel any resistance from the pipe.